Maytag MFF2055DRH Scheda Tecnica

5. Replace the base grille. 

■

Pull open the freezer drawer. 

■

Align the three clips on the back of the base grille with the 
three tabs at the base of the refrigerator.

■

Push the base grille in toward the refrigerator until it is 
firmly in place.

If the space between the refrigerator doors and freezer drawer 
looks uneven, you can adjust it using the following instructions:

1. Remove the top hinge cover.

2. Loosen the top hinge screws using a 

⁵⁄₁₆" socket or wrench.

3. Have someone hold the door in place or put a spacer 

between the doors and drawer.

4. Tighten the top hinge screws once the door is in the desired 

location.

5. Replace the top hinge cover.

The water filter status light on the control panel will help you 
know when to order and replace the water filter.   

■

GOOD - The water filter icon on the control lights up in BLUE.

■

ORDER a replacement filter - The water filter icon on the 
control lights up in YELLOW.

■

REPLACE the water filter - The water filter icon on the control 
lights up in RED and “Replace Filter” will appear on the 
display. 

■

EXPIRED - The water filter icon lights up in RED and “Replace 
Filter” flashes on the display.

NOTE: If water flow to your water dispenser or ice maker 
decreases noticeably, change the filter sooner. The 
disposable water filter should be replaced at least every 
6 months, depending on your water quality and usage.

■

After changing the water filter, reset the status. Press and 
hold the WATER FILTER button for 3 seconds. When the 
system is reset, the water filter icon will return to its BLUE 
color and the words “Replace Filter” will disappear from the 
display. 

1. Locate the water filter in the top-right corner of the 

refrigerator compartment.

2. Lift open the filter cover door. The filter will be released and 

then eject as the door is opened.

3. When the door is completely open, pull the filter straight out.

NOTE: There may be some water in the filter. Some spilling 
may occur. Use a towel to wipe up any spills.

4. Take the new filter out of its packaging and remove the 

covers from the O-rings. Be sure the O-rings are still in place 
after the covers are removed.

5. With the arrow pointing up, align the new filter with the filter 

housing and slide it into place. The filter cover door will 
automatically begin to close as the new filter is inserted.

6. Close the filter cover door completely in order to snap the 

filter into place. You may need to press hard.

7. Flush the water system. See “Water Dispenser” or “Water and 

Ice Dispensers.”

The air filter reduces the buildup of odors. This helps to maintain 
a cleaner environment inside the refrigerator. 

On some models, your refrigerator's accessory packet includes 
an air filter, which must be installed prior to use. On some 
models, the air filter is already installed at the factory. 

Install the air filter behind the vented door, located along the rear 
interior wall of the refrigerator compartment.

1. Remove the air filter from its packaging.

NOTE: An air filter status indicator is included with the air 
filter. The indicator is not needed for models that display the 
air filter status on the control panel.

2. Lift open the vented door.

3. Snap the filter into place.

A

B

Do not use with water that is microbiologically unsafe or 
of unknown quality without adequate disinfection before 
or after the system. Systems certified for cyst reduction 
may be used on disinfected waters that may contain 
filterable cysts.