Maytag MFT2574DEM Manuale Proprietario

Troubles

hooting

TROUBLESHOOTING

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, 
refer to the warranty page in this manual and scan the code with your mobile device, or visit www.maytag.com/product_help. 
In Canada, visit www.maytag.ca.

Contact us by mail with any questions or concerns at the address below:

In the U.S.A.:

Maytag Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692

In Canada:

Maytag Brand Home Appliances
Customer eXperience Centre
200 – 6750 Century Ave.
Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence. 

Operation 

Check electrical supply

Plug the power cord into a grounded 3 prong outlet.

Do not use an extension cord.

Make sure there is power to the outlet. Plug in a lamp to see 
if the outlet is working.

Reset a tripped circuit breaker. Replace any blown fuses.

NOTE: If problems continue, contact an electrician. 

Check controls

Make sure the controls are turned on. See “Using the 
Control(s).”

New installation

Allow 24 hours following installation for the refrigerator to 
cool completely. 

NOTE: Adjusting the temperature controls to the coldest 
setting will not cool either compartment more quickly.

Refrigerator control is in Showroom 
mode (on some models)

If the refrigerator is in Showroom mode, cooling is turned off 
and “Showroom” will be illuminated on the control panel. See 
“Using the Control(s)” for more information.