Smeg ST8649U Manuale Istruttivo
EN
43
INSTALLATION INSTRUCTIONS
BEFORE MAKING ELECTRICAL CONNECTIONS, DISCONNECT THE
MAINS POWER SUPPLY FROM THE WORK AREA.
CHECK THAT THE MAINS SUPPLY IN THE PLACE OF INSTALLATION
COMPLIES WITH THE REGULATIONS IN FORCE IN THE COUNTRY OF
USE, AND THAT IT IS CORRECTLY EARTHED.
THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MALFUNCTION OF
FAULT, THE EARTH REDUCES THE RISK OF ELECTROCUTION BY PRO-
VIDING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE, LESS
RESISTANT PATH. THIS APPLIANCE IS FITTED WITH A SUPPLY CORD
CONTAINING AN EARTH WIRE AND PLUG. FIT THE PLUG INTO A SUIT-
ABLE SOCKET, INSTALLED AND EARTHED IN COMPLIANCE WITH THE
LAWS IN FORCE IN THE COUNTRY OF INSTALLATION.
AN INCORRECTLY CONNECTED EARTH WIRE MAY GENERATE THE RISK
OF ELECTROCUTION. IF IN DOUBT AS TO THE CORRECT EARTHING OF
THE APPLIANCE, CALL IN A QUALIFIED ELECTRICIAN OR THE TECH-
NICAL ASSISTANCE SERVICE. DO NOT CHANGE THE PLUG ATTACHED
TO THE APPLIANCE. IF THE PLUG IS NOT SUITABLE FOR THE SOCKET,
CALL IN A QUALIFIED ELECTRICIAN TO FIT A SUITABLE PLUG.
IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED
BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE
CENTRE IN ORDER TO AVOID ANY RISK.
DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CONNEC-
TIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR
BURNING, WITH CONSEQUENT FIRE HAZARD.