Maytag MSB26C6MDE Manuale Proprietario

NOTE: Tighten the nut by hand. Then tighten it with a wrench 
two more turns. Do not overtighten. 

4. Turn shutoff valve ON.

5. Check for leaks. Tighten any nuts or connections (including 

connections at the valve) that leak.

1. Plug into a grounded 3 prong outlet.

2. Flush the water system. See “Water and Ice Dispensers” in 

the User Instructions or User Guide.

NOTE: Allow 24 hours to produce the first batch of ice. Allow 
72 hours to completely fill ice container.

On some models, your refrigerator's accessory packet includes 
an air filter, which must be installed prior to use. On some 
models, the air filter is already installed at the factory. 

The air filter reduces the buildup of odors. This helps to maintain 
a cleaner environment inside the refrigerator. 

The filter should be installed behind the vented door, which is 
located (depending on your model) along either the rear or left 
interior wall near the top of the refrigerator compartment.  

1. Remove the air filter from its packaging.

2. Lift open the vented door.

3. Snap the filter into place. 

4. Close the vented door.

The filter comes with a status indicator, which should be 
activated and installed at the same time the air filter is installed. 

1. Place the indicator face-down on a firm, flat surface.

2. Apply pressure to the bubble on the back of the indicator, 

until the bubble pops to activate the indicator.

3. Lift open the vented air filter door. On some models, there are 

notches behind the door.

■

Slide the indicator down into the notches, facing outward.

NOTE: The indicator will not easily slide into the notches 
if the rear bubble has not been popped.

■

Close the air filter door, and check that the indicator is 
visible through the rectangular hole in the door.

■

Store the indicator in a visible place you will easily 
remember - either inside the refrigerator, or elsewhere in 
your kitchen or home.

A

B

C

D

E

F

G