Smeg ST8646U Istruzione Sull'Installazione

34 

Rev. 0.1

•     Check that there are no deposits of sludge or rust inside the water pipe: if 

there are, allow the water to run from the water supply tap for a few min-
utes. 

•  Plug the power cord back into the socket. 
•  Reconnect the water intake hose and open the tap again . 

    In some cases it is possible to remedy minor problems by referring to the fol-
lowing instructions:

•  the dishwasher is connected to the electrical power supply; 
•  there is no power failure; 
•  the water tap is open;
•  the dishwasher door is properly closed.   

•  the drain hose is not kinked
•  the drain siphon is not obstructed; 
•  the dishwasher fi lters are not clogged.   

•     the correct amount of detergent has been added; 
•  there is regenerating salt inside the special container; 
•  the dishes are being loaded correctly; 
•  the selected program is suitable for the dish types and their degree of soil-

ing; 

•  all the fi lters are clean and positioned correctly; 
•  the spray arm nozzles are not obstructed; 

•  there is no object obstructing the rotation of the spray arms.

•  there is rinse aid inside the special container; 
•  the rinse-aid dispenser setting is correct; 
•  the detergent used is of good quality and has not lost its effectiveness (for 

example, through incorrect storage, with the box left open).