Gladiator GARF19XXYK Istruzione Sull'Installazione

Gather the required tools and parts before starting installation.
TOOLS NEEDED: 

Depending on your model, the casters may be packed in either the 
upper or lower compartment. Remove the box containing the 
casters.

NOTE: Install the casters before you install any of the FeaturePak 
items.
1.

Open the lower compartment door and remove the base grille. 
Remove the grille by grasping the grille with both hands, lifting up 
and pulling bottom of the grille toward you.

Place the plastic skids (shipped with the refrigerator/freezer) on 
the floor at least 3 ft (91.44 cm) apart. Lay a piece of cardboard 
or other protective material over the skids. This will elevate the 
refrigerator/freezer to allow for easier caster installation and also 
protect it from scratches.
NOTE: If the skids have been discarded or are not available, 
2" x 4" boards may be used.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or  “WARNING.”

These words mean:

■

¹⁄₂" Socket wrench or nut 

driver

■

¹⁄₂" Wrench

■

³⁄₈" Socket wrench or nut 

driver

■

Rigid casters (2)

■

Swivel casters (2)

■

⁵⁄₁₆–18 Self-locking 

hex-nuts (16)

■

⁵⁄₁₆–18 x ⁷⁄₈" 

Hex-head bolts (16)

■

¹⁄₄–20 x 1¹⁄₄" Self-tapping 

hex-head bolts (4)

■

¹⁄₄–20 x 1¹⁄₄" Lock washers (4)

■

Caster brackets (located in 
FeaturePak) (2)

■

Plastic skids (shipped with 
the refrigerator/freezer)