Dacor PHW Manuale



before You Call for Service

PRobLeM 

MAY be CAuSed bY

WHAT To do

nothing Works. Control panel is not lit. 

Blower does not work.

Power to hood is off.

turn on power at junction or fuse 

box. Check for tripped breaker or 

blown fuse.

Hood main power switch is off. 

Make sure hood main power switch is 

on (see page 3).

Power outage.

Call electric company.

Hood not connected to electric 

power.

Have qualified electrician connect 

hood to electric power.

Light does not work. Control panel is 

not lit. 

See Nothing Works above.

Light does not work. Control panel is 

lit.

Loose light bulb.

Check to make sure that both prongs 

on the light bulb are inserted into the 

holes on the light socket (see  

page 6).

Light bulb burned out.

Replace light bulb (see page 6).

Blower does not draw heat and smoke 

properly.

filters clogged or dirty.

Check filters. Make sure they are 

completely clean and not blocked by 

foreign objects.

Blower set to low setting.

See Operating Instructions sec-

tion.

Damper jammed shut or duct work 

clogged. 

Consult with a qualified installation 

professional.*

Blower shuts off by itself after being 

left on for a long time.

normal operation.

to conserve energy, the blower auto-

matically turns itself off if it is left on 

for four hours continuously.

Blower does not work. Control panel 

not lit.

See Nothing Works above.

Blower does not work. Control panel 

lit.

Blower malfunction.

Call for service.

* the duct work connected from the range hood chimney to outside the house or building required to vent heat and 

smoke is not manufactured, warranted or serviced by Dacor. The customer is responsible for having a qualified installer 

install and maintain the duct work.