Kenyon B41541L Manuale Proprietario

The cooktop is designed with a 2 step ON, and 1 step OFF for safety reasons, 

requiring at least 2 different touches of the controls to activate an element, but only one touch to 

deactivate an element or the entire unit.

Clean the cooktop before you use it for the first time.  A thorough cleaning with our 

recommended cooktop cleaner (

Cerama Bryte Ceramic Cooktop Cleaner) will provide a 

coating on the cooktop prior to its first use.  A sample is included with your Kenyon cooktop.  

The cooktop surface should be free of any foreign substances before use.

To activate a heating element, first the master power must be turned on by placing and holding a 

finger over the circular area next to the master power graphic.  An audible beep will be heard and 

a light next to the master power graphic will illuminate.  Then the desired element must be turned 

on, by placing a finger over the circular area marked ON/OFF for that element.  The same beep 

will sound and a light will illuminate.  Then the heat level is chosen, by 

holding a finger over the circular areas marked with + or -.  Touching the + first will incrementally 

set the heat level from settings 1 thru 8 with a beep and corresponding number of lights 

illuminated.  Touching the - first will incrementally set the level from settings 8 thru 1 with a beep 

and corresponding number of lights illuminated.  When the desired heat level is reached the fin-

ger is removed and the cooktop remains at that heat level.  If an element is activated, but no heat 

level chosen, the element will automatically turn off in 10 seconds.

To change the heat level place finger on + or - graphic of desired element to change heat level 

incrementally up or down.

To deactivate an element, touch circular area marked ON/OFF to turn the element off.  Also the 

master power ON/OFF can be touched and the entire cooktop will be deactivated.

12

Key graphic

for lock function

Lock function LED

Master power LED

Lock function button

Master power button

Master power graphic

Element indicator

graphic

Element heat level indicator

Hot surface

indicator LEDs

- button decreases

heat setting

+ button increases

heat setting

Element ON/OFF button

Element activation LED

Fig. D