Kenyon B41541L Manuale Proprietario

A - 13 inches maximum depth of overhead cabinets

B - 36 inches is minimum height of countertop above floor

C - The minimum flat countertop surface that the cooktop will rest

      upon must be equal to or greater than the overall cooktop 

      dimensions (refer to the following page for overall cooktop 

      dimensions).

D - 30 inches minimum clearance between the top of the cooking

      surface and the bottom of an unprotected wood or metal cabinet or 

      24 inch minimum clearance when the bottom of the wood or metal

      cabinet is protected by not less than 1/4-inch-thick flame retardant

      millboard covered with not less than No. 28 MSG sheet steel, 

      0.015-inch-think stainless steel, 0.024-inch-thick aluminum or 

      0.020-inch-thick-copper.

E - 1-inch minimum from backsplash of countertop to edge of glass

      (refer to the following page for overall cooktop dimensions).

“Do Not Install Closer Than 1/2 Inch 

(12mm) From Any Adjacent Surface”, and 

Before making the countertop cutout, check for clearance.  Check to see if the cooktop will clear 

the front and side walls of the base cabinet.  It is also important to provide enough ventilation.

Adequate ventilation of the space below the 

countertop must be provided to ensure 

proper operation of the cooktop.  Heat 

transferred from the cooktop bottom pan 

during operation will overheat an improperly 

ventilated area.

Allow a 2” minimum clearance between the bottom of the metal pan of the cooktop and any 

combustible surface located below, ie:  the upper edge of a drawer installed below the cooktop 

(see Fig. B).  Failure to provide proper clearance and ventilation may result in a fire hazard.

7

Fig. A

Fig. B