Intel Xeon E5430 BX80574E5430 Scheda Tecnica
Codici prodotto
BX80574E5430
27
Quad-Core Intel® Xeon® Processor 5400 Series Electrical Specifications
Notes:
1.
For functional operation, all processor electrical, signal quality, mechanical and thermal specifications must
be satisfied.
2.
.
Excessive overshoot or undershoot on any signal will likely result in permanent damage to the processor.
3.
Storage temperature is applicable to storage conditions only. In this scenario, the processor must not
receive a clock, and no lands can be connected to a voltage bias. Storage within these limits will not affect
the long-term reliability of the device. For functional operation, please refer to the processor case
temperature specifications.
4.
This rating applies to the processor and does not include any tray or packaging.
5.
Failure to adhere to this specification can affect the long-term reliability of the processor.
2.13
Processor DC Specifications
The processor DC specifications in this section are defined at the processor die
(pads) unless noted otherwise. See
(pads) unless noted otherwise. See
for the Quad-Core Intel® Xeon®
Processor 5400 Series land listings and
current specifications are detailed in
. For platform planning refer to
, which provides V
CC
static and transient tolerances. This
same information is presented graphically in
and
The FSB clock signal group is detailed in
. BSEL[2:0] and VID[6:1] signals
are specified in
. The DC specifications for the AGTL+ signals are listed in
. Legacy signals and Test Access Port (TAP) signals follow DC specifications
similar to GTL+. The DC specifications for the PWRGOOD input and TAP signal group
are listed in
are listed in
through
list the DC specifications for the processor and are valid
only while meeting specifications for case temperature (T
CASE
as specified in
), clock frequency, and input voltages. Care should be taken to
read all notes associated with each parameter.
2.13.1
Flexible Motherboard Guidelines (FMB)
The Flexible Motherboard (FMB) guidelines are estimates of the maximum values the
Quad-Core Intel® Xeon® Processor 5400 Series will have over certain time periods.
The values are only estimates and actual specifications for future processors may differ.
Processors may or may not have specifications equal to the FMB value in the
foreseeable future. System designers should meet the FMB values to ensure their
systems will be compatible with future Quad-Core Intel® Xeon® Processor 5400
Series.
Quad-Core Intel® Xeon® Processor 5400 Series will have over certain time periods.
The values are only estimates and actual specifications for future processors may differ.
Processors may or may not have specifications equal to the FMB value in the
foreseeable future. System designers should meet the FMB values to ensure their
systems will be compatible with future Quad-Core Intel® Xeon® Processor 5400
Series.
Table 2-11. Processor Absolute Maximum Ratings
Symbol
Parameter
Min
Max
Unit
Notes
1, 2
V
CC
Core voltage with respect to V
SS
-0.30
1.35
V
V
TT
FSB termination voltage with respect to V
SS
-0.30
1.45
V
T
CASE
Processor case temperature
See
See
°C
T
STORAGE
Storage temperature
-40
85
°C
3, 4, 5