Broan 15SS Manuale Utente

Your compactor has been designed with easy access for 
cleaning when required.

The interior and exterior of the cabinet are finished with a 
durable baked-on enamel finish.

Do not use harsh or gritty cleanser or scouring pads 
which may mar the finish of the compactor. Use a mild 
detergent solution on these surfaces.

1.  Pull out trash bucket until it stops.

2.  Remove (1) 

screw from each of the bucket slides.  

3.  Press down on left and right 

bucket slide release tabs 

while pulling the bucket out of the unit.  

4.  Vacuum and clean cabinet base, track channels, and 

bucket, particularly in corners.

5.  Wash the cabinet interior with a mild detergent 

solution.

6.   When finished cleaning the cabinet, install the trash 

bucket by reversing steps 2 and 3.

1.  The 

ram is equipped with a compaction plate that can 

be removed for easy cleaning.

2.  Make sure the trash bucket is empty and without a 

bag.

3.  Push the trash bucket into the cabinet. Unlatch and 

lower the bucket front.

4.  Press the compaction plate 

release tab on the front 

of the ram to disengage the plate. The plate can be 
removed by pulling down and away from the ram.

5.   Once removed the compactor plate can be washed in 

a mild detergent solution or placed in a dishwasher.  

6.  Re-install the compactor plate by inserting the tab 

(on the rear of the plate) into the slot (at in the rear 
of the ram). Press up on the front of the plate until it 
securely latches in place.

RELEASE

TAB

COMPACTION 

PLATE

RAM

2.

3.

1.

BUCKET SLIDE

RELEASE TAB

SCREW