Acronis Backup & Recovery 10 Advanced Workstation TIDLBPDES5 Manuale Utente
Codici prodotto
TIDLBPDES5
The encryption key is then encrypted with AES-256 using a SHA-256 hash of the password as a key.
The password itself is not stored anywhere on the disk; the password hash is used for verification
purposes. With this two-level security, the archives are protected from any unauthorized access, but
recovering a lost password is not possible.
The password itself is not stored anywhere on the disk; the password hash is used for verification
purposes. With this two-level security, the archives are protected from any unauthorized access, but
recovering a lost password is not possible.
4.1.2.2.
Creating an unmanaged centralized vault
To create an unmanaged centralized vault, perform the following steps.
Vault
Name
Specify a unique name for the vault. The creation of two centralized vaults with the same
name is prohibited.
name is prohibited.
Comments
Enter the distinctive description of the vault.
Type
Select the Unmanaged type.
Path (p. 129)
Specify where the vault will be created.
After you have performed all the required steps, click OK to commit creating the unmanaged
centralized vault.
centralized vault.
Vault path
To specify the path where the managed vault will be created
1. Enter the full path to the folder in the Path field or select the desired folder in the folders tree.
Unmanaged vaults can be organized:
o
on a network share
o
on a Storage Area Network (SAN)
o
on a Network Attached Storage (NAS)
o
on FTP and SFTP servers.
As appears from the original FTP specification, credentials required for access to FTP servers are transferred
through a network as plaintext. This means that the user name and password can be intercepted by an
eavesdropper using a packet sniffer.
through a network as plaintext. This means that the user name and password can be intercepted by an
eavesdropper using a packet sniffer.
To create a new folder for the vault, click
Create folder.
A vault can be created in an empty folder only.
2. Click OK.
4.1.2.3.
Attaching a managed vault
A vault managed by a storage node can be attached to another storage node. You might need to do
so when retiring storage node hardware, when the storage node is lost or when balancing loads
between storage nodes. As a result, the first node stops managing the vault. The second node scans
so when retiring storage node hardware, when the storage node is lost or when balancing loads
between storage nodes. As a result, the first node stops managing the vault. The second node scans
Copyright © Acronis, Inc., 2000-2009
129