Acronis Backup & Recovery 10 Advanced Workstation TIDLBPDES5 Manuale Utente
Codici prodotto
TIDLBPDES5
installed operating system could prevent the machine from booting. You cannot set a logical drive
or dynamic volume active.
or dynamic volume active.
•
Logical. Information about logical volumes is located not in the MBR, but in the extended
partition table. The number of logical volumes on a disk is unlimited. A logical volume cannot be
set as active. If you recover a system volume to another hard disk with its own volumes and
operating system, you will most likely need only the data. In this case, you can recover the
volume as logical to access the data only.
partition table. The number of logical volumes on a disk is unlimited. A logical volume cannot be
set as active. If you recover a system volume to another hard disk with its own volumes and
operating system, you will most likely need only the data. In this case, you can recover the
volume as logical to access the data only.
File system
Change the volume file system, if required. By default, the program selects the original volume's file
system. Acronis Backup & Recovery 10 can make the following file system conversions: FAT 16 -> FAT
32 and Ext2 -> Ext3. For volumes with other native file systems, this option is not available.
system. Acronis Backup & Recovery 10 can make the following file system conversions: FAT 16 -> FAT
32 and Ext2 -> Ext3. For volumes with other native file systems, this option is not available.
Assume you are going to recover a volume from an old, low-capacity FAT16 disk to a newer disk.
FAT16 would not be effective and might even be impossible to set on the high-capacity hard disk.
That's because FAT16 supports volumes up to 4GB, so you will not be able to recover a 4GB FAT16
volume to a volume that exceeds that limit, without changing the file system. It would make sense
here to change the file system from FAT16 to FAT32.
FAT16 would not be effective and might even be impossible to set on the high-capacity hard disk.
That's because FAT16 supports volumes up to 4GB, so you will not be able to recover a 4GB FAT16
volume to a volume that exceeds that limit, without changing the file system. It would make sense
here to change the file system from FAT16 to FAT32.
Older operating systems (MS-DOS, Windows 95 and Windows NT 3.x, 4.x) do not support FAT32 and
will not be operable after you recover a volume and change its file system. These can be normally
recovered on a FAT16 volume only.
will not be operable after you recover a volume and change its file system. These can be normally
recovered on a FAT16 volume only.
Logical drive letter (for Windows only)
Assign a letter to the recovered volume. Select the desired letter from a drop-down list.
•
With the default AUTO selection, the first unused letter will be assigned to the volume.
•
If you select NO, no letter will be assigned to the recovered volume, hiding it from the OS.You
should not assign letters to volumes that are inaccessible to Windows, such as to those other
than FAT and NTFS.
should not assign letters to volumes that are inaccessible to Windows, such as to those other
than FAT and NTFS.
6.3.6.3.
Virtual machine type / virtualization server selection
The new virtual machine can be created either on a virtualization server (this requires Acronis Backup
& Recovery 10 Agent for Hyper-V or Agent for ESX/ESXi to be installed) or in any accessible local or
networked folder.
& Recovery 10 Agent for Hyper-V or Agent for ESX/ESXi to be installed) or in any accessible local or
networked folder.
To select the virtualization server the new virtual machine will be created on
1. Choose the Place on the virtualization server that I select option.
2. In the left part of the window, select the virtualization server. Use the right part of the window to
review details on the selected server.
3. Click OK to return to the Data recovery page.
To select the type of virtual machine
1. Choose the Save as files of the VM type that I select to the folder that I specify option.
2. In the left part of the window, select the virtual machine type. Use the right part of the window
to review details on the selected virtual machine type.
3. Click OK to return to the Data recovery page.
220
Copyright © Acronis, Inc., 2000-2009