Hansgrohe 10120821 Istruzioni Di Montaggio
Technical Information
Recommended water pressure
14.7 - 72.5 psi
Max. water pressure
145 psi
Recommended hot water temp.
120� - 140� F*
Max. hot water temp
165�F*
Hole size in mounting surface
1 /8”
Max. mounting surface depth
1 /8”
Flow rate
2.2 gpm
Cartridge with high temperature limit stop
/8” supply hoses - requires /8” compression fitting (not included)
/8” supply hoses - requires /8” compression fitting (not included)
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Installation Instructions
Sit the faucet with black sealing ring on top of the
mounting surface.
Install the friction washer, metal washer, and
mounting nut. Tighten the mounting nut.
Check the position of the faucet. When satis-
fied, use a slot-headed screwdriver to tighten the
tensioning screws.
Feed the pull rod through the hole in the back
of the faucet body (pull rod not included with
10129XX1).