Perlick HP24TS31L2A Utilizzo E Cura
PERLICK RESIDENTIAL INSTALLATION MANUAL
6
perlick.com
Signature Series – HP15 Models
Model
Min Temp Set
Max Temp Set
HP15R
33° F
42° F
HP15B
33° F
48° F
HP15W
45° F
65° F
HP15T
33° F
42° F
Signature Series – HP24 Models
Model
Min Temp Set
Max Temp Set
HP24R
33° F
42° F
HP24F
-10° F
10° F
HP24B
33° F
48° F
HP24W
45° F
65° F
HP24T
33° F
42° F
Signature Series – HP48 Models
Model
Min Temp Set
Max Temp Set
HP48WO
40° F
65° F
HP48WW
40° F
65° F
Signature Series Sottile
Model
Min Temp Set
Max Temp Set
HH24RS
33°
42°
HH24BS
33°
48°
HH24WS
45°
65°
ADA-Compliant Series
Model
Min Temp Set
Max Temp Set
HA24FB
-10°
10
LED Functions
The following table describes LED functions
The following table describes LED functions
LED
Mode
Function
ON
Compressor is on
Flashing
Anti-short cycle
delay is on
ON
Defrost is on
ON
Alarm is on
Flashing
You are in the process of
programming the unit
DIGITAL TEMPERATURE CONTROL
C-Series Models
Figure 2. nEW 961 Digital Temperature Controller
To Change Setpoint Temperature
1. Press
1. Press
. “SP” will be displayed. Press
again to
display current setpoint temperature.
2. Press and to modify it and
2. Press and to modify it and
or to save the
change.
On/Off
To turn the unit off, press and hold for at least 5
seconds. “OF” will be displayed. To turn the unit on again,
press and hold for at least 5 seconds.
To turn the unit off, press and hold for at least 5
seconds. “OF” will be displayed. To turn the unit on again,
press and hold for at least 5 seconds.
Perlick C-Series units come standard with state-of-the-art
digital control.
digital control.
Programming Button Definitions:
STAND-BY (ESC)
Press and release
• Returns to the previous
menu level
• Confirms parameter value
Press for at least 5 sec.
• Activates the Standby
function (off ) (When
outside the menus)
outside the menus)
SET (ENTER)
Press and release
• Opens Machine Status menu
and displays alarms (if active)
Press for at least 5 sec.
• Opens Programming menu
• Confirm commands
• Confirm commands
UP
Press and release
• Scroll menu items
• Increases values
• Increases values
Press for at least 5 sec.
• Activates the Manual
Defrost function
DOWN
Press and release
• Scroll menu items
• Decreases values
• Decreases values
Press for at least 5 sec.
• Function can be configured
by the user
NOTE: Dependent on the model and configuration, the controllers
have been programmed to only allow a temperature adjustment
within a specified range. See the chart below for the specified range
allowed for your unit.
have been programmed to only allow a temperature adjustment
within a specified range. See the chart below for the specified range
allowed for your unit.