Smeg ST8246U Manuale Utente

USER INSTRUCTIONS

INSTALLATION INSTRUCTIONS

INSTALLATION AND HOOK-UP

To install and hook up this appliance, consult the attached installation manual.

Bear in mind the following warnings when installing and hooking up the dishwasher.

DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON

THE SHARP EDGES OF THE APPLIANCE; WEAR SAFETY GLOVES.

INSTALLATION, REPAIRS AND SERVICING MUST BE PERFORMED

BY QUALIFIED AND AUTHORIZED TECHNICIANS. AS WELL AS IN-

VALIDATING THE WARRANTY, WORK CARRIED OUT BY UNAUTHOR-

IZED PERSONS MAY GENERATE HAZARDS. INSTALLATION MUST BE

PERFORMED IN COMPLIANCE WITH ALL THE DIRECTIVES IN FORCE

IN THE COUNTRY OF INSTALLATION AND, IF THESE DO NOT EXIST: IN

THE UNITED STATES THE NATIONAL ELECTRIC CODE; IN CANADA THE

CANADIAN ELECTRIC CODE C22.1 - LATEST EDITION/PROVINCIAL

AND MUNICIPAL CODES AND/OR LOCAL CODES.

BUILDING-IN A DISHWASHER UNDERNEATH A CERAMIC HOB IS AB-

SOLUTELY FORBIDDEN. A DISHWASHER CAN BE BUILT-IN UNDER-

NEATH A CONVENTIONAL HOB PROVIDED THERE IS NO BREAK IN

THE KITCHEN WORKTOP, AND THE DISHWASHER AND HOB ARE IN-

STALLED AND SECURED CORRECTLY, SO THAT NO HAZARDS ARE

GENERATED.

PREVENTING THE RISK OF CLOGGING OR DAMAGE: IF THE WA-

TER PIPE IS NEW OR HAS NOT BEEN USED FOR A LONG TIME, BEFORE

CONNECTING TO THE WATER SUPPLY CHECK THAT THE WATER IS

CLEAR AND FREE OF IMPURITIES, TO PREVENT DAMAGE TO THE AP-

PLIANCE. THE DISHWASHER MUST ALWAYS BE CONNECTED TO

THE WATER SYSTEM WITH NEW HOSES; OLD OR USED HOSES

MUST NEVER BE REUSED.

CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS

MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSI-

TIONED ON THE INNER EDGE OF THE DOOR.

IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT RE-

PLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL

SERVICE CENTRE.

THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MALFUNCTION OF

FAULT, THE EARTH REDUCES THE RISK OF ELECTROCUTION BY PRO-

VIDING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE, LESS RE-

SISTANT PATH.