Maytag MRT118FZEH Manuale Utente

The door is difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

■

Gaskets dirty or sticky? Clean gaskets and contact surfaces

with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

■

New installation? Allow 24 hours following installation for

the refrigerator to cool completely.

■

Door opened often or left open? Allows warm air to enter

refrigerator. Minimize door openings and keep door

fully closed.

■

Large load of food added? Allow several hours for

refrigerator to return to normal temperature.

■

Control(s) set correctly for the surrounding conditions?

Adjust the control(s) a setting colder. Check temperature in 24

hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■

Humid room? Contributes to moisture buildup.

■

Door opened often or left open? Allows humid air to enter

refrigerator. Minimize door openings and keep door

fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■

Refrigerator connected to a water supply and the supply

shutoff valve turned on? Connect refrigerator to water

supply and turn water shutoff valve fully open.

■

Kink in the water source line? A kink in the line can reduce

water flow. Straighten the water source line.

■

Ice maker turned on? Make sure wire shutoff arm or switch

(depending on model) is in the ON position.

■

New installation? Wait 24 hours after ice maker installation

for ice production to begin. Allow 3 days to completely fill

the ice container.

■

Large amount of ice recently removed? Allow 24 hours for

ice maker to produce more ice.

■

Ice cube jammed in the ice maker ejector arm? Remove

ice from the ejector arm with a plastic utensil.

■

Reverse osmosis water filtration system connected to

your cold water supply? This can decrease water pressure.

See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■

Water shutoff valve not fully open? Turn the water shutoff

valve fully open.

■

Kink in the water source line? A kink in the line can reduce

water flow. Straighten the water source line.

■

Reverse osmosis water filtration system connected to

your cold water supply? This can decrease water pressure.

See “Water Supply Requirements.”

■

Questions remain regarding water pressure? Call a

licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■

New plumbing connections? New plumbing connections

can cause discolored or off-flavored ice.

■

Ice stored too long? Discard ice. Wash ice bin. Allow 24

hours for ice maker to make new ice.

■

Odor transfer from food? Use airtight, moisture proof

packaging to store food.

■

Are there minerals (such as sulfur) in the water? A water

filter may need to be installed to remove the minerals.

ACCESSORIES

The following accessories are available for your refrigerator.

To order, contact us and ask for the Part Number.
In the U.S.A., visit

www.maytag.com/accessories or call

1-800-688-9900.
In Canada, visit

www.maytag.ca or call 1-800-807-6777.

affresh

Stainless Steel Cleaner:

In U.S.A., order Part #W10355016

In Canada, order Part #W10355016B

affresh

Stainless Steel Wipes:

In U.S.A., order Part #W10355049

In Canada, order Part #W10355049B

affresh

Kitchen & Appliance Cleaner:

In U.S.A., order Part #W10355010

In Canada, order Part #W10355010B

Air Filter:

Order Part #W10311524

Reversibility Kit:

Order Part # W10395149