Liebherr RU510 Utilizzo E Cura
12
C
leaning
Removing the bottom shelf
Pull the shelf upwards on
the right and left at the back
and then remove it towards
you.
the right and left at the back
and then remove it towards
you.
• Clean the inside of the
appliance and equipment
parts with lukewarm water
and a little detergent.
parts with lukewarm water
and a little detergent.
• Thoroughly dry all parts
with a cloth.
•
Do not damage or remove the model plate on the
inside of the appliance. It is very important for servic-
ing your appliance.
inside of the appliance. It is very important for servic-
ing your appliance.
Cleaning the appliance interior
Remove the glass shelves. Lift at the front and then
remove the shelf towards you.
remove the shelf towards you.
Inserting the grid shelf
Extend the pull-out rails as far as they will go. Place the
front recesses of the shelf on the securing pins.
Slide the shelf together with the pull-out rails into the
appliance as far as they will go.
Push the shelf downwards on the right and left at the
back and click into place.
Cleaning
WARNING!
• To prevent possible injury due to an
electrical shock, be sure to disconnect the
power cord or turn off the circuit breaker
before cleaning the appliance.
power cord or turn off the circuit breaker
before cleaning the appliance.
• To avoid injury or damage, do not use steam
cleaning equipment to clean the appliance.
Cleaning the appliance outside
• Clean the door surface with a clean and soft cloth. If
necessary, use a moist cloth (water + detergent).
• Use a glass cleaner to clean the glass surface.
IMPORTANT
Do not use abrasive or scouring pads or sponges.
Do not use concentrated cleaning agents.
Never use abrasive or acid-based cleaners or
chemical solvents.
Do not use concentrated cleaning agents.
Never use abrasive or acid-based cleaners or
chemical solvents.
1. Remove the ventilation
grille from the toe kick
panel.
panel.
2. Clean the dust filter
using a vacuum cleaner.
3. Reattach the ventilation
grille.
The dust filter in the appliance base must be
cleaned at least once a year.
cleaned at least once a year.
1.
2.