Liebherr RU510 Utilizzo E Cura
4
s
afeTy
Important Safety Information
• To prevent injury to you or damage to the unit,
the appliance should be unpacked and set up by
two people.
two people.
• If the appliance is damaged on delivery, contact
the supplier immediately before connecting it to
the power source.
the power source.
• To guarantee safe operation, ensure that the
appliance is set up and connected as described
in this manual.
in this manual.
• Disconnect the appliance from the power source
if a fault occurs. Pull out the plug, turn off or dis-
able the power source.
able the power source.
• When disconnecting the appliance, always pull it
out by the plug; never pull on the cable.
• Any repairs and work on the appliance should
only be performed by the customer service
department. Unauthorized work may be danger-
ous to the user. The power source cable should
only be changed or replaced by the customer
service department.
department. Unauthorized work may be danger-
ous to the user. The power source cable should
only be changed or replaced by the customer
service department.
• Do not store explosives or sprays using com-
bustible propellants such as butane, propane,
pentane, etc. in the appliance. Electrical compo-
nents might cause leaking gas to ignite. You can
identify such sprays by the printed contents or a
flame symbol.
pentane, etc. in the appliance. Electrical compo-
nents might cause leaking gas to ignite. You can
identify such sprays by the printed contents or a
flame symbol.
• To prevent possible injury due to an electrical
shock, be sure to disconnect the power cord or
turn off the circuit breaker before cleaning the
appliance.
turn off the circuit breaker before cleaning the
appliance.
• To avoid injury or damage to the appliance, do
not use steam cleaning equipment to clean the
appliance.
appliance.
• Do not operate the appliance in the presence of
explosive fumes.
• In the event of a power outage, open the door
as infrequently as possible.
• To protect the appliance from possible damage,
allow it to stand 1/2 to 1 hour in place before
turning on the electricity. This allows the refriger-
ant and system lubrication to reach equilibrium.
turning on the electricity. This allows the refriger-
ant and system lubrication to reach equilibrium.
Electrical Safety
Connect this appliance to a 15 amp or 20 amp, 110-
120 VAC, circuit which is grounded and protected by a
circuit breaker or fuse.
120 VAC, circuit which is grounded and protected by a
circuit breaker or fuse.
We recommend using a dedicated circuit for this appli-
ance to prevent circuit overload and the chance of
interruption to the appliance.
ance to prevent circuit overload and the chance of
interruption to the appliance.
This appliance is equipped with a three-prong (ground-
ing) polarized plug for your protection against possible
shock hazards.
ing) polarized plug for your protection against possible
shock hazards.
Where a two-prong wall receptacle is encountered,
contact a qualified electrician and have it replaced with
a properly grounded three-prong receptacle in accor-
dance with all local codes and ordinances.
contact a qualified electrician and have it replaced with
a properly grounded three-prong receptacle in accor-
dance with all local codes and ordinances.
WARNING!
Electrocution hazard.
Electrical grounding required.
• Do not remove the round grounding
prong from the plug.
• Do not use extension cords or
ungrounded (two-prong) adapters.
• Do not use a power cord that is frayed or
damaged.
•
Do not use a power strip.
Failure to follow these instructions may
result in fire, electrical shock or death.
result in fire, electrical shock or death.