Maytag MFX2876DRM Scheda Tecnica

There are two refrigerator compartment doors. The doors can be 
opened and closed either separately or together.

There is a vertically-hinged seal on the left refrigerator door.

■

When the left side door is opened, the hinged seal 
automatically folds inward so that it is out of the way.

■

When both doors are closed, the hinged seal automatically 
forms a seal between the two doors. 

The controls are located above the external dispenser.

■

Depending on your model you may have Style 1 or Style 2 
controls. Please follow the instructions specific to your 
model.

■

Style 1 controls are shown in the following graphics except 
where indicated. 

■

The control panel display will turn off automatically and enter 
“sleep” mode when the control buttons and dispenser pads 
have not been used for 2 minutes or more. Press any control 
to reactivate the display screen. 

For your convenience, your refrigerator and freezer temperature 
controls are set to the recommended set points at the factory. 

When you first install your refrigerator, make sure the temperature 
controls are still set to the recommended set points. The 
recommended set points are 37°F (3°C) for the refrigerator and 
0°F (-18°C) for the freezer. 

■

Wait 24 hours before you put food into the refrigerator. If you 
add food before the refrigerator has cooled completely, your 
food may spoil.

NOTE: Adjusting the set points to a colder than 
recommended setting will not cool the compartments any 
faster.

■

If the temperature is too warm or too cold in the refrigerator or 
freezer, first check the air vents to be sure they are not 
blocked before adjusting the controls.

■

The recommended set points should be correct for normal 
household use. The controls are set correctly when milk or 
juice is as cold as you like and when ice cream is firm.

NOTE: Areas such as a garage or porch, may experience 
hotter or colder temperatures and higher humidity than inside 
the home. You may need to adjust the temperature away from 
the recommended set points to accommodate for these 
conditions. 

■

Wait at least 24 hours between adjustments. Recheck the 
temperatures before other adjustments are made.

1. Press and hold TEMP for 3 seconds to activate Temperature 

mode.

2. When Temperature mode is activated, press TEMP to toggle 

between Fridge and Freezer. The display will show the 
temperature set point of the selected compartment, as 
shown.

NOTE: To view temperatures in degrees Celsius, press 
OPTIONS. To return the display setting to degrees 
Fahrenheit, press OPTIONS again.

A