HP ENVY 5540 Manuale Proprietario

From the printer control panel, you can set up and manage your printer wireless connection and perform a

variety of network management tasks. This includes viewing and changing network settings, restoring

network defaults, and turning the wireless function on or off.

Network settings are provided for your convenience. However, unless you are an advanced user,

you should not change some of these settings (such as the link speed, IP settings, default gateway, and

firewall settings).

From the Home screen, touch   (Wireless) and then touch   (Settings).

Touch Print Report and then touch Network Configuration Page.

The default IP setting for the IP settings is Automatic, which sets the IP settings automatically. If you are an

advanced user and want to use different settings (such as the IP address, subnet mask, or the default

gateway), you can change them manually.

Be careful when manually assigning an IP address. If you enter an invalid IP address during the

installation, your network components cannot connect with the printer. To avoid errors, first let the printer

join the network and obtain an IP address automatically. After the subnet mask, default gateway, and DNS

address settings are configured, you can change the printer IP address to a manual setting.

From the Home screen, touch   (Wireless) and then touch   (Settings).

Touch Wireless Settings.

Touch Advanced Settings.

Touch IP Settings.

A message appears warning that changing the IP address removes the printer from the network. Touch

OK to continue.

Automatic is selected by default. To change the settings manually, touch Manual, and then enter the

appropriate information for the following settings:

●

●

●

●

Enter your changes, and then touch Apply.

ENWW

Change network settings

63