HP OJ4650 Guida Utente

call is a voice call, you need to answer it before the printer answers the call. To set up the printer

to answer calls automatically, turn on the Auto Answer setting.

●

If you set up the printer to answer faxes manually, you must be available to respond in person to

incoming fax calls or the printer cannot receive faxes. To set up the printer to answer calls

manually, turn off the Auto Answer setting.

Run a fax test.

If you pick up the phone before the printer answers the call and hear fax tones from a sending fax machine,

you need to answer the fax call manually.
If you use your phone line for voice, fax, and your computer dial-up modem, follow these directions to set up

your fax.
If you encounter problems setting up the printer with optional equipment, contact your local service provider

or vendor for further assistance.

Use these instructions if your computer has a DSL/ADSL modem

  Back view of the printer

1

Telephone wall jack.

2

Parallel splitter.

3

DSL/ADSL  filter.

4

Telephone.

5

Computer DSL/ADSL modem.

6

Computer.

7

Use the phone cord provided to connect to the 1-LINE port on the back of the printer.

You might need to connect the supplied phone cord to the adapter provided for your country/region.

You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two

RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has

two RJ-11 ports on the front and a plug on the back.

120 Appendix B   Additional fax setup

ENWW