HP OJ4650 Guida Utente
NOTE:
If the reports are not legible, you can check the estimated ink levels from the control panel or the HP
software. For more information, see
.
NOTE:
Ink level alerts and indicators provide estimates for planning purposes only. When you receive
a low-ink alert, consider having a replacement cartridge available to avoid possible printing delays. You do
not need to replace the ink cartridges until the print quality becomes unacceptable.
NOTE:
Ensure that the printheads and ink cartridges are in good conditions and installed properly. For more
information, see
This section contains the following topics:
●
●
●
●
●
●
●
Print fax confirmation reports
You can print a confirmation report either when a fax is sent, or when any fax is sent or received. The default
setting is On (Fax Send). When turned off, a confirmation message appears briefly on the control panel after
each fax is sent or received.
NOTE:
You can include an image of the first page of the fax on the Fax Sent Confirmation report if you
select On (Fax Send) or On (Fax Send and Fax Receive) , and if you scan the fax to send from memory or use
the Scan and Fax option.
To enable fax confirmation
1.
From the printer control panel display, touch Setup .
2.
Touch Setup .
3.
Touch Reports and touch Fax Confirmation .
4.
Touch to select one of the following options.
Off
Does not print a fax confirmation report when you send and receive faxes successfully. This is the
default setting.
On (Fax Send)
Prints a fax confirmation report for every fax you send.
On (Fax Receive)
Prints a fax confirmation report for every fax you receive.
On (Fax Send and Fax
Receive)
Prints a fax confirmation report for every fax you send and receive.
To include an image of the fax on the report
1.
From the printer control panel display, touch Fax .
2.
Touch Setup .
3.
Touch Reports and touch Fax Confirmation .
ENWW
Use reports
43