Canon T5I Guida Utente
Troubleshooting Guide
326
Make sure the card is properly inserted (p.31).
Slide the card’s write-protect switch to the Write/Erase position (p.31).
If the card is full, replace the card or delete unnecessary images
to make room (p.31, 268).
to make room (p.31, 268).
If you try to focus in the One-Shot AF operation while the focus
confirmation light <o> in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again to refocus automatically,
or focus manually (p.43, 103).
confirmation light <o> in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again to refocus automatically,
or focus manually (p.43, 103).
If a card error message is displayed, see page 32 or 337.
Set the lens focus mode switch to <AF> (p.39).
To prevent camera shake, press the shutter button gently (p.42, 43).
If the lens has an Image Stabilizer, set the IS switch to <1>.
In low light, the shutter speed may become slow. Use a faster shutter
speed (p.110), set a higher ISO speed (p.92), use flash (p.107), or use
a tripod.
speed (p.110), set a higher ISO speed (p.92), use flash (p.107), or use
a tripod.
Shooting-Related Problems
No images can be shot or recorded.
The card cannot be used.
The image is out of focus.
COP
Y