HP OJ4620 Manuale Proprietario

English

20

Problems setting up the printer

• 

Make sure you have removed all packing tape 

and material from outside and inside the printer.

• 

Make sure you use the SETUP cartridges that 

came with your printer when you first set up the 

printer.

• 

Make sure you have loaded plain, white, unused 

A4- or letter-size (8.5x11 inch) paper in the 

printer.

• 

Make sure that any cords and cables that you are 

using are in good working order.

• 

Make sure you have securely connected the 

power cord and that the power source is working 

properly.

• 

Make sure the   (Power) light is on and not 

Solve setup problems

 The following sections provide 

help with problems you might 

have while setting up the printer.

How do I install the user guide?

Depending on the option you select when you 

install the HP software, the user guide might not be 

installed on your computer.
To install the user guide, complete the following 

steps:
1.  Insert the software CD provided with the printer 

into your computer, and then follow the 

onscreen instructions.

2.  In the screen showing recommended software, 

select the option for your operating system:

• 

Windows: Select the option with “Help” in 

the name.

• 

Mac OS X: Select the HP Recommended 

Software option. 

3.  Follow the onscreen instructions to finish 

installing the user guide.

Tip: If you cannot find the HP software CD or if 

your computer does not have a CD or DVD 

drive, you can download the HP software 

from HP’s support website (www.hp.com/go/

customercare). From this website, search for 

your printer, and then select Software & Driver 

Downloads. Select your operating system, 

select the option for driver downloads, and 

then select the option that has “Full Feature 

Software and Drivers” in the name.

If you need more help, see the user 

guide. For information about finding 

the user guide, see “Where is the user 

blinking. When the printer is first turned on, it 

takes approximately 45 seconds to warm up.

• 

Make sure the printer is displaying the home 

screen and that no other lights on the printer 

control panel are lit or blinking. 

• 

Make sure you have correctly loaded paper in the 

tray and that the paper is not jammed in the 

printer.

• 

Make sure you have closed all latches and covers 

properly.