Maytag MRT711BZDM Manuale Proprietario

Your model may have some or all of these features. 

1. Lift the front of the shelf to raise the shelf tabs up and out of 

the opening in each shelf track. Slide the shelf out the rest of 
the way.

2. Replace the shelf by tilting the back end downward to align 

the back shelf tab under the track on each side of the freezer. 
Gently push the shelf into the freezer until the two center shelf 
tabs are positioned within the opening in each track. Lower 
the shelf to rest on the shelf tracks. 

Storage times will vary according to the quality and type of food, 
the type of packaging or wrap used (should be airtight and 
moisture-proof), and the storage temperature. Seal the package 
or container securely to avoid taste and odor transfer throughout 
the product. Ice crystals inside a sealed package are normal. This 
simply means that moisture in the food and air inside the package 
have condensed, creating ice crystals.
Put no more unfrozen food into the freezer than will freeze within 
24 hours (no more than 2 to 3 lbs of food per cubic foot [907 to 
1,350 g per L] of freezer space). Leave enough space in the 
freezer for air to circulate around packages. The freezer door must 
close tightly. 
NOTE: For more information on preparing food for freezing, check 
a freezer guide or reliable cookbook.

Your model may have some or all of these features. 

The door rails may be removed for easier cleaning.

1. Depending on your model, remove the rails by pushing in 

slightly on the front of the bracket while pulling out on the 
inside tab. Repeat these steps for the other end.

2. Replace the rails by aligning the ends of the brackets with the 

buttons on the sides of the door liner. Firmly snap bracket and 
assembly onto the tabs above the shelf as shown. 

1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired support and 

pushing it down until it stops.

The utility compartment may be removed for easier cleaning.
To remove and replace the utility compartment:

1. Remove the utility compartment by squeezing against one 

side while raising the utility compartment up and pulling it 
straight out. 

2. Replace the utility compartment by positioning one side in the 

lock and sliding in the opposite side until it stops. 

Do not clean glass shelves or covers with warm water when 
they are cold. Shelves and covers may break if exposed to 
sudden temperature changes or impact, such as bumping. 
Tempered glass is designed to shatter into many small, 
pebble-size pieces. This is normal. Glass shelves and covers 
are heavy. Use both hands when removing them to avoid 
dropping.