Samsung mxj630/za Manuale Utente

English

Tuner /External Source

• Tuner: "TUNER RECORDING""RECORD"

• External Source : "AUX

RECORDING""RECORD"

4. To stop recording, press the STOP (@) button.

The product automatically creates and saves

recorded files in .MP3 format (SAM-XXXX.MP3).

5. To remove the USB device safely, press the STOP

(@) button once again. After recording, a directory

named “RECORDING(DISCxxxx)”(FULL CD

RECORDING), “RECORDING”(TRACK

RECORDING), “CD COPY”(MP3 CD/USB),

“TUNER RECORDING” or “AUX RECORDING”

is created on your USB device.

• Do not disconnect the USB or the AC Cord during

recording as this may cause damage to the file.

• If you disconnect the USB device during a recording,

the unfinished recording file may get damaged and

cannot be deleted. If this occurs, please connect the

USB device to a PC, back up the data stored in the

USB, and then format it.

• When the USB memory has insufficient free space,

the system will display “NOT ENOUGH MEMORY”.

• The USB device or HDD you are recording to must

be formatted in the FAT file system. The NTFS file

system is not supported.

• When you use the CD high speed search function,

CD recording is not available.

• Sometimes, the recording time may be longer with

some USB devices.

• In the My List or Auto Change mode, you can't use

the recording function.

• The preset equalizer and user equalize are not

available during a recording.

• The GIGA SOUND and FOOTBALL functions are set

to "OFF" automatically and are not available during a

recording.

• The REPEAT function is set to "OFF" automatically

and is not available during a recording.

• You cannot record the radio when searching or when

no available station is found in the Tuner mode.

• Note that setting the input level too loud when

recording music from an external device through

the AUX or USB channel may cause noise in the

recording. If this occurs, lower the external device’s

volume level.

• The maximum TUNER/AUX recording time is 5

hours.

• If USB2 has no USB device connected, and you

press the USB REC button, "USB2 NOT READY" is

displayed.

• If the Hi-Fi Component does not support the USB

device connected to USB2, when you press the

USB REC key, "NOT SUPPORTED USB DEVICE" is

displayed.

Recording Function

You can record from a CD, radio broadcast, or an

external source to a USB storage device.

Connect an external USB storage device to the

USB 2 (

) jack on your product.

2. Play a disc, tune to a station, or connect an

external source to your product.

• Press the CD/Bluetooth button on the main

unit or press the CD button on the remote

control to select the MP3/CD function.

• Press the OPEN/CLOSE button to open the

disc tray.

• Insert a CD and press the OPEN/CLOSE

button to close the disc tray.

• Use the CD selection buttons ( [ or ] ) to

select the desired song.

Tuner

• Press the TUNER/AUX button on the main

unit or press the TUNER button on the remote

control to select the TUNER function.

• Tune to a station you want to record.

External Source

• Connect an External Component/MP3 player to

your product.

• Press the TUNER/AUX button on the main unit

or press the AUX button on the remote control

to select the <AUX> input.

• Play a song from the external device.

USB 1

• Connect a USB device to the USB 1 jack of

your product

• Press the

button on the main unit or

press the USB button on the remote control to

select the USB 1.

• Play a song from USB 1.

3. Press the USB REC button to start recording.

• “TRACK RECORDING” is displayed and CD

recording starts.

• Press and hold the USB REC button to start

recording all tracks on the disc. "FULL CD

RECORDING" is displayed.

MP3-CD, USB 1

• Press the USB REC button. The currently

playing file is copied onto the USB 2 device.

• Press and hold the USB REC button. All the

files in the current folder are copied onto the

USB 2 device.

COPY: “CHECK”“START”“COPY XX”“COPY END”

is displayed. When the recording is done,

“STOP” will be displayed.

• If there is a duplicate file name, "FILE EXIST" is

displayed, and the function is canceled.