Yamaha RXA1040 Manuale Proprietario

PREPARATIONS

➤ Optimizing the speaker settings automatically (YPAO)

En

When “Multi Position” is set to “No”, follow the procedure below for 
measurement. It takes about 3 minutes to perform the 
measurement.

The measurement will start in 10 seconds. Press ENTER 
again to start the measurement immediately.

• To cancel the measurement temporarily, press RETURN.

The following screen appears on the TV when the 
measurement finishes.

• If any error message (such as E-1) or warning message (such as W-1) 

appears, see “Error messages” (p.44) or “Warning messages” (p.45).

• To check the measurement results, select “Result”. For details, see 

“Checking the measurement results” (p.43).

To save the measurement results, use the cursor 
keys (e/r) to select “SAVE” and press ENTER.

The adjusted speaker settings are applied.

• To finish the measurement without saving the result, select “CANCEL”.

Use the cursor keys (e/r) to select “YES” or “NO” 
to enable/disable YPAO Volume and press ENTER.

• If YPAO Volume is enabled, the high- and low-frequency levels are 

automatically adjusted according to the volume so that you can enjoy 
natural sounds even at low volume.

• You can also enable/disable YPAO Volume in “YPAO Volume” (p.97) in the 

“Option” menu.