Avanti MO7103SST Manuale Proprietario

Pagina di 34
 
12 
SETTING A COOKING PROGRAM 
 
A. One-stage Cooking 
1. 
Use the number pads to set a cooking time. 
You can set a cooking time from one second to 
99 minutes and 99 seconds.  
2. 
If you want to set a power level other than 
100% power, touch POWER, then use the 
number pads to enter the power level. You can 
set the power level from 1 to 9. 
       Use single digits to set a cooking power level: 
 
 
 
3. 
Touch START/STOP to start cooking. 
 
Number pad 
Cooking power 
90% 
80% 
70% 
60% 
50% 
40% 
30% 
20% 
10% 
 
B. Multi-stage Cooking 
You can program oven for 4 cooking stages. Each 
stage can be programmed with a different power 
level and time. To program 2-stage, 3-stage or 4-
stage cooking, repeat the one-stage cooking steps 
1 and 2 and touch START. The oven will 
automatically proceed to the end of cooking 
stages. 
 
NOTE:  
    
After stage 1 time has elapsed, one beep 
sound, signaling the beginning of stage 2. After 
total time has elapsed, 4 beeps sound and END 
appears in display. Touch RESET pad or open 
oven door to clear END before starting another 
cooking function. 
 
 
 
 
 
SPEED DEFROST 
1. 
Touch SPEED DEFROST. 
2. 
Enter desired defrosting time by touching 
correct number pads. Digital timer sets minutes 
and seconds from left to right so a single digit 
can be set (5 for 5 seconds ) or up to 4 digits 
(2405 for 24 minutes 5 seconds).  
3. 
Touch START/STOP. 
 
NOTE:  
After time has elapsed four signals sound and END 
appears in display. Touch RESET pad or open door 
to clear END before starting another cooking 
function. 
 
 
 
DEFROST BY WEIGHT 
1. 
Touch DEFROST BY WEIGHT pad. 
2. 
Enter weight. 
3. 
Touch START/STOP pad. 
Note: 
Weight must be in pounds and ounces.  
Ounce weights less than 10 must be preceded by 
a 0. If label gives weight in pounds only, change 
the fraction of a pound to ounces using the 
following chart (See page 19).