Philips AJT3300/37 Manuale Utente

10 EN

Listen to an external device

With this clock radio, you can also listen to an 

external audio device such as an MP3 player.

1 

Connect an audio input cable with a 3.5 

mm connector on both ends to

•  the AUDIO IN socket on this speaker, 

and

•  the headphone socket on the external 

device.

  

2 

Press SOURCE repeatedly to select AUX 

source.

3 

Play audio on the external device (refer to 

its user manual).

Set alarm timer

You can set two alarms to ring at different time.

AUDIO IN

Note

 

•

You can only set alarm in standby mode.

 

•

Make sure that you have set the clock correctly.

1 

Press and hold AL1 or AL2 for two 

seconds to activate alarm setting mode.

 

»

The hour digits blink.

2 

Press HR repeatedly to set the hour.

3 

Press MIN repeatedly to set the minute.

4 

Press AL1 or AL2 to confirm.

5 

Press HR or MIN to set the alarm source: 

Buzzer or FM tuner.

6 

Press AL1 or AL2 to confirm.

Tip

 

•

The clock radio exits alarm setting mode when being 

idle for 10 seconds.

Activate or deactivate the alarm 

timer

1 

Press AL1 or AL2 to view alarm settings.

2 

Press AL1 or AL2 again to activate or 

deactivate the alarm timer.

 

»

If the alarm timer is activated, the 

alarm indicator for FM tuner or buzzer 

is displayed.

 

»

If the alarm timer is deactivated, the 

alarm indicator disappears.

•  To stop the ringing alarm, press the 

corresponding AL1/AL2. 

 

»

The alarm repeats ringing for the next 

day.

Note

 

•

If FM tuner is selected and you are listening to 

radio when alarm time comes, buzzer is activated 

automatically. 

 

•

When alarm sounds, volume increases gradually. You 

cannot adjust the alarm volume manually.