HP DJ3631 Manuale Proprietario
Status
Description
The HP ePrint light is on.
The HP ePrint feature is on and ready to use. For information
about how to print documents using HP ePrint, see
The HP ePrint light is off.
The HP ePrint feature is off.
To turn on HP ePrint, press the HP ePrint button (
).
The HP ePrint light blinks for three seconds, and then turns
off.
One of the following might have occurred.
●
The Web Services have not been setup up.
●
A mandatory update for the printer is available but has
not been installed.
●
The HP ePrint feature has been disabled.
Press the HP ePrint button (
) and the Information button
(
) at the same time to print a diagnostic page, and then
follow the instructions on the page.
The HP ePrint light keeps blinking.
The HP ePrint feature is turned on, but the printer is not
connected to the Web Services server.
Press the HP ePrint button (
) and the Information button
(
) at the same time to print a diagnostic page, and then
follow the instructions on the page.
Ink Level icons and Ink Alert light
●
One of the Ink Level icons is blinking with no segment, and the Ink Alert light is on.
Cause
Solution
One of the following might have occurred.
●
The corresponding ink cartridge is missing.
●
The corresponding ink cartridge is installed improperly,
or still has plastic tape on it.
●
If one of the ink cartridges is missing, the printer enters
single-cartridge mode. To exit the single-cartridge
mode, insert the corresponding ink cartridge. For more
information about the single-cartridge mode, see
.
●
If both ink cartridges are installed in the printer, remove
the corresponding ink cartridge, make sure there is no
plastic tape on it, and then reinsert the ink cartridge
securely. For more information, see
.
●
Both Ink Level icons are blinking with no segment, and the Ink Alert light is blinking.
ENWW
Control panel lights and display icons status
9