HP OJ 3830 Manuale Proprietario

Before you begin setting up the printer for faxing, determine which kind of phone system your country/

region uses. The instructions for fax setup differ depending on whether you have a serial- or parallel-type

phone system.

●

If you do not see your country/region listed in the table, you probably have a serial-type phone system.

In a serial-type phone system, the connector type on your shared telephone equipment (modems,

phones, and answering machines) does not allow a physical connection to the "2-EXT" port on the

printer. Instead, all equipment must be connected at the telephone wall jack.

In some countries/regions that use serial-type phone systems, the phone cord that came with

the printer might have an additional wall plug attached to it. This enables you to connect other telecom

devices to the wall jack where you plug in the printer.

You might need to connect the supplied phone cord to the adapter provided for your country/region.

●

If your country/region is listed in the table, you probably have a parallel-type telephone system. In

a parallel-type phone system, you are able to connect shared telephone equipment to the phone line by

using the "2-EXT" port on the back of the printer.

If you have a parallel-type phone system, HP recommends you use the 2-wire phone cord

supplied with the printer to connect it to the telephone wall jack.

Argentina

Australia

Brazil

Canada

Chile

China

Colombia

Greece

India

Indonesia

Ireland

Japan

Korea

Latin America

Malaysia

Mexico

Philippines

Poland

Portugal

Russia

Saudi Arabia

Singapore

Spain

Taiwan

Thailand

USA

Venezuela

Vietnam

  

If you are unsure which kind of telephone system you have (serial or parallel), check with your telephone

company.

This section contains the following topics:

●

●

●

●

●

156 Appendix B   Additional fax setup

ENWW