HP OJ 3830 Manuale Proprietario
Set up Web Services
Before you set up Web Services, make sure your printer is connected to the Internet using a wireless
connection.
To set up Web Services, use one of the following methods.
To set up Web Services using the printer control panel
1.
From the Home screen, touch
(HP ePrint)
2.
Touch Set Up.
3.
Touch Accept to accept the HP Connected terms of use and enable Web Services.
4.
In the Printer Update Options screen, choose the option which allows the printer to automatically
install updates.
NOTE:
If a printer update is available, the printer will download and install the update, and then
restart. You will have to repeat the instructions from step 1 to set up HP ePrint.
NOTE:
If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5.
When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
To set up Web Services using the Embedded Web Server (EWS)
1.
Open the EWS. For more information, see
.
2.
Click the Web Services tab.
3.
In the Web Services Settings section, click Setup, click Continue, and follow the on-screen instructions
to accept the terms of use.
4.
If prompted, choose to allow the printer to check for and install printer updates.
NOTE:
When updates are available, they are automatically downloaded and installed, and then the
printer restarts.
NOTE:
If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5.
When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
ENWW
Set up Web Services
37