GE GZS22DMJ-ES Manuale Utente

The temperature controls are preset in the factory at 37°F for the refrigerator 

compartment and 0°F for the freezer compartment. Allow 24 hours for the 

temperature to stabilize to the preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual 

temperature in the refrigerator and freezer. The actual temperature may vary slightly 

from the SET temperature based on usage and operating environment.

Spill 

Shelf

The spill shelf is not self-draining. To reduce water spotting, the shelf and its grille should be cleaned regularly. 

If no water is dispensed when the refrigerator is first installed, there may be air in the water line system. 

Press the dispenser arm for at least two minutes to remove trapped air from the water line and to fill the 

water system. To flush out impurities in the water line, throw away the first six glassfuls of water.

Never put fingers or any other objects into the ice crusher discharge opening.

 (on some models)

To set the alarm, press this pad until the indicator light comes on. This alarm will 

sound if either door is open for more than 3 minutes. The light goes out and the 

beeping stops when you close the door.

(on some models)

TurboCool ™ rapidly cools the refrigerator compartment in order to more 

quickly cool foods. Use TurboCool ™ when adding a large amount of food to the 

refrigerator compartment, putting away foods after they have been sitting out at 

room temperature or when putting away warm leftovers. It can also be used if the 

refrigerator has been without power for an extended period.

NOTES:   The refrigerator temperature cannot be changed during TurboCool ™.
 

The freezer temperature is not affected during TurboCool ™.

 

When opening the refrigerator door during TurboCool ™, the fans will 

continue to run if they have cycled on.

(on some models)

ExpressChill 

 cools the ExpressChill drawer in the refrigerator compartment to 

allow items in this drawer to cool faster. In most models this feature lowers the 

drawer temperature for a set time length (45 min.). In other models the time length 

can be varied (continue pressing the pad until the light appears next to the desired 

time length).

To stop this feature before the set time is up, press the pad until no options are 

selected.

(on some models)

When you need ice in a hurry, press this pad to speed up ice production. This will 

increase ice production for the following 48 hours or until you press the pad again.

3

The icemaker will produce seven 
FXEHVSHUF\FOH³DSSUR[LPDWHO\

100–130 cubes in a 24-hour 

period, depending on freezer 

compartment temperature, 

room temperature, number of 

door openings and other use 

conditions.
Throw away the first few batches 

of ice to allow the water line to 

clear.

(dispenser models)
The ice bin is heavy when full.
Set the power switch to the OFF 
position before removing the bin.
When replacing the bin, be sure to 
press it firmly into place. If it does not 
go all the way back, remove it and 
rotate the drive mechanism 1/4 turn. 
Then push the bin back again.

Icemaker

Feeler Arm

Power 

Switch

Icemaker

Feeler Arm

Power 

Switch

Green             

Power Light

 Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. 

Do not place fingers or hands on the automatic ice making mechanism while the refrigerator is plugged in.