Frigidaire FASE7073NW Istruzione Sull'Installazione

20

“T” SLOT IN 

FRONT PANEL

“T” POST ON 

DOOR HINGE

1 Protect fl at work surface, such as top of dryer or 

fl oor near dryer, with a soft cloth or towel.

2  Open dryer door and remove the two hinge screws. 

Remove lower screw fi rst, then upper screw.

3  Supporting door with both hands, squarely lift door 

and hinge upward approximately 3/8” (10 mm) so 

“T” post on back of hinge can slide out through “T” 

slot on front panel.

  4  Gently place dryer door face down on fl at, covered 

work surface.

  5  Locate the 5 indented head screws (no. 1-5) in 

the small, circular recesses (at 11, 1, 4, 6, and 8 

o’clock positions) of the inner door. Remove and 

save these 5 screws.

  6  Locate the 2 pan head screws (no. 6-7) on the 

inner door nearest the metal strike and center of 

hinge (9 and 3 o’clock positions). Remove and save 

these 2 screws.

  7  Separate inner door assembly from outer door 

assembly.

Do not attempt to remove the 2 “tamper-resistant” 

screws that hold the inner glass in place.