Kegco Two Keg Commercial Grade Kegerator - Stainless Steel Manuale Istruttivo

EXTERNAL CO2 TANK MOUNT

1. Drill and bore a hole through the wall in either of the places where the foam insulation is exposed.

2. Insert the CO2 line through the hole.

3. Seal the hole around the CO2 line with silicone sealer to prevent cold air leakage.

Care and Maintenance

Cleaning your kegerator:

• Turn off the power, unplug the appliance, and remove all items including the dispense kit.

• Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2

tablespoons of baking soda to a quart of water.

• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.

• Wash the outside cabinet with warm water and mild liquid detergent. Rinse and wipe dry with a clean soft cloth.

• Do not use steel wool or a steel brush, caustic soap, abrasive cleaners or bleach on the stainless steel. These will

damage the stainless steel or contaminate the stainless steel with steel particles and rusting may occur.

• Wash door gaskets on a regular basis, preferably weekly. Simply remove the door gasket from the frame of the

door, soak in warm water and soap for 30 minutes, dry with a soft cloth, and replace.

• Check door gaskets for a proper seal after they are replaced.

• Periodically remove the shelves and pilasters from the unit and clean them with mild soap and warm water. To

remove the pilasters, first remove the shelves and shelf brackets. Then, simply lift the pilaster up and out.

• It is recommended to clean the unit completely inside and out yearly to maximize the longevity of the product.

Cleaning the condenser coil:

• For efficient operation, it is important that the condenser surface be kept free of dust, dirt, and lint. We

recommend clearing the condenser coil and fins at least once per month.

• Turn off the power and unplug the appliance.

• Clean with a commercial condenser coil cleaner, available from any kitchen equipment retailer. Brush the

condenser fins from top to bottom, not side to side.

• After cleaning, straighten any bent condenser fins with a fin comb.

Cleaning the fan blade and motor:

• If necessary, clean the fan blades and motor with a soft cloth

• If it is necessary to wash the fan blades, cover the fan motor to prevent moisture damage.

www.kegco.com

1-888-980-4810