Allavino Reserva Series 53 Bottle Dual-Zone Wine Refrigerator Manuale Utente
OPERATION INSTRUCTIONS
For Models: WNWR55-1SSRN/WNWR53-2SSRN
Disconnect power before removing
doors
Unscrew 2 screws at bottom and remove the Reed switch (6),
then install (6) at top of door frame, Unscrew the screw located
underneath the door frame and the limit device (5),and relocate
if at the left end side of the door frame. The door revolves 180
degrees.
then install (6) at top of door frame, Unscrew the screw located
underneath the door frame and the limit device (5),and relocate
if at the left end side of the door frame. The door revolves 180
degrees.
This operation requires two persons.
Remove the decorative nails (8) from
the top left of the cabinet and install the
spare top hinge (Left) (7) at top left to
the cabinet with 3 screws.
the cabinet with 3 screws.
Take out the 3 hinge screws from the top
right hinge (4) and remove it
right hinge (4) and remove it
Install the spare top hinge (Left) (9) at top
left of the cabinet with 3 screws. Install the
door once correctly aligned.
left of the cabinet with 3 screws. Install the
door once correctly aligned.
Open the door to at 90 degree angle, take out
the 2 screws from lower door axis (2), remove
the door (3) and the axis plate from the door.
the 2 screws from lower door axis (2), remove
the door (3) and the axis plate from the door.