Summit 4.1 cf Undercounter Built-in Refrigerator - Stainless Steel Manuale Utente
4
Technical Information
Models: FF511L & FF511LBI (white with solid door)
FF521BL & FF521BLBI (black with solid door)
SCR450L & SCR450LBI (white with glass door)
SCR500BL & SCR500BLBI (black with glass door)
Capacity: 4.1 cubic feet
Electrical Input: 115V AC / 60Hz
Rated
Current:
1.4A
Power
Input:
100W
Refrigerant: R134a, 1.75 oz
Installation: Free-standing (-L & -BL models)
Built-in (-LBI & -BLBI models)
Unit Weight: 57 lbs
Unit
Dimensions:
19⅞"W x 23¼"D x 33¼"H*
* For built-in models (-BI suffix), height can be adjusted from 33¼" to 34½"
*For models with suffix ADA, height is modified to 32” for use under lower counters
*For models with suffix ADA, height is modified to 32” for use under lower counters
Installation Instructions
Before Using Your Refrigerator:
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
3 wire shelves (models FF511L, FF511LBI, SCR450L & SCR450LBI)
3 glass shelves (models FF521BL, FF521BLBI, SCR500BL & SCR500BLBI)
1 crisper drawer with glass cover
1 handle with screws and handle seal
2 keys
Before connecting the unit to the power source, let it stand for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installing the Refrigerator:
Place your unit on a floor that is strong enough to support it when it is fully loaded. To
level your unit, adjust the leveling legs at the bottom.
level your unit, adjust the leveling legs at the bottom.
Models FF511L, FF521BL, SCR450L and SCR500BL are designed to be free-
standing only, and should not be recessed or built in. The four models with the suffix
-BI are specifically designed to be built in.
standing only, and should not be recessed or built in. The four models with the suffix
-BI are specifically designed to be built in.
When installing models FF511L, FF521BL, SCR450L and SCR500BL, allow 5 inches
of space at the back and sides of the unit, which will allow the proper air circulation to
cool the compressor and condenser.
of space at the back and sides of the unit, which will allow the proper air circulation to
cool the compressor and condenser.
The built-in (-BI) models are designed to be installed under the counter in a 21-inch
opening. When installing,
opening. When installing,
provide the following clearances to ensure the best