Kegco Commercial Back Bar Refrigerator with Two Glass Doors Manuale Istruttivo
SHELF INSTALLATION:
1. Hook the shelf clips onto the clip hanger
2. Place the shelves on the shelf clips, making sure that all corners are seated properly.
Setting the Temperature
The Kegco Back Bar Cooler is able to maintain the proper storage temperature for beer, soda, and other cold beverages,
provided it is installed correctly in the proper environment. Avoid opening and closing the door of the cooler too often
to ensure a consistent temperature inside the unit.
To start, turn the temperature control knob to the maximum
setting (7) to achieve coldest position quickly. Allow the unit to
run for 48 hours. The temperature range of the thermostat goes
from 33°F to 41°F (-0.5°C to 5°C). Thereafter, adjust the
thermostat to desired temperature range. To turn off the cooler,
turn the control knob to the “OFF” position.
CAUTION: Leaving the temperature control on the coldest setting
may cause the evaporator coil to freeze and ice up. This will
eventually result in a warmer cabinet temperature.
If you are going on vacation, you may leave the cooler operating during vacations of less than three weeks. If the
appliance will not be used for several months, you should remove all items and turn off the appliance. Clean and dry the
interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.
www.kegco.com
6
1-888-980-4810