Electrolux E40PV100FS Manuale Proprietario

1  Use 8” round metal duct to connect the discharge collar on the hood to 

the ductwork above.

2  Use duct tape to make all joints secure and air tight.

3  Remove the two temporary retaining screws from the lower flue and set 

it in place on the hood.

4  Secure decorative flue to hood with two mounting screws (3.9 x 9.5mm).

pan head mounting screws.

1  Remove the four (4) screws from the inside of the hood.
2  Remove the trim by pulling downward.
3  Slide the new trim upward into hood.
4  Replace the four screws inside hood.