Electrolux E30MO65GSS Istruzione Sull'Installazione
3
CONVECTION MICROWAVE OVEN INSTALLATION INSTRUCTIONS
EXHAUST DUCT ASSEMBLY
1. Insert the edge of DUCT (B) into the tab of DUCT (C).
Secure together by using SCREW (A) provided in the kit.
Remove the existing screw (#1) and (#2) at the upper right
and left rear of the oven. Secure DUCT (C) with screw (#1)
and DUCT (B) with SCREW (#2) just removed from the
oven. See illustration 2.
Remove the existing screw (#1) and (#2) at the upper right
and left rear of the oven. Secure DUCT (C) with screw (#1)
and DUCT (B) with SCREW (#2) just removed from the
oven. See illustration 2.
Illustration 3
DUCT A MUST INSERT
INTO DUCT BC
INTO DUCT BC
DUCT A
DUCT BC
FLANGE FROM
DUCT A WILL BE
FLUSH WITH CORNER
OF MICROWAVE
DUCT A WILL BE
FLUSH WITH CORNER
OF MICROWAVE
SCREW A
DUCT A
DUCT BC
SCREW A
THESE TWO
FLANGES
MUST MATE
TOGETHER
FLANGES
MUST MATE
TOGETHER
DUCT D MUST
INSERT INTO
DUCT A
INSERT INTO
DUCT A
DUCT D
DUCT A
SCREW A
SCREW A
DUCT D
Illustration 4
Illustration 2
DUCT C
#1
DUCT B
#2
SCREW A
2. Position DUCT (A) on the top of the oven inserting edge
of DUCT (BC) assembly into five tabs of DUCT (A). Tighten
two SCREWS (A), securing DUCT (A) to DUCT (BC). See
illustration 3.
two SCREWS (A), securing DUCT (A) to DUCT (BC). See
illustration 3.
3. Position DUCT (D) on top of the oven and insert it into five
tabs of DUCT (A). Secure DUCT (D) using two SCREWS (A)
provided. See illustration 4.
provided. See illustration 4.