Electrolux EW27MC65JS Manuale Proprietario

Pagina di 72
20
•   Suppose you want to defrost for 5 minutes at 
30%.
Example
Step
Press
1. Press MICRO OVEN
2.  Enter defrosting time.
  
  
3. Press power level - or +
 or 
4.  Press the numeric pad 3 to 
select power level 30.
5. Press START
Manual defrost
If the food that you wish to defrost is not listed on 
the Auto Defrost chart or is above or below the 
limits in the “Amount” column on the Defrost chart , 
you need to defrost manually.
You can defrost any frozen food, either raw or 
previously cooked, by using Power level 30. Follow 
the exact procedure found under Time cooking. 
Estimate defrosting time and lower your power 
level to 30%.
For either raw or previously cooked frozen food 
the rule of thumb is approximately 5 minutes per 
pound. For example, defrost 5 minutes for 1 pound 
of frozen spaghetti sauce.
Always stop the oven periodically to remove or 
separate the portions that are defrosted. If food is 
not defrosted at the end of the estimated defrosting 
time, program the oven in 1 minute increments on 
power level 30 until totally defrosted.
When using plastic containers from the freezer, 
defrost only long enough to remove from the plastic 
in order to place in a microwave-safe dish.
Time cooking
Your Microwave Oven can be programmed for 
99 minutes 59 seconds (99.59). Always enter the 
seconds after the minutes, even if they are both 
zeros.
•   Suppose you want to cook for 5 minutes at 
100%.
Example
Step
Press
1. Press MICRO OVEN
2. Enter cooking time.
  
  
3. Press START
To set power level
There are ten preset power levels.
Using lower power levels increases the cooking 
time which is recommended for foods such as 
cheese, milk and long slow cooking of meats. 
Consult cookbook or recipes for specific 
recommendations.
Numeric 
pad
Power level
Common 
words for 
power
levels
0
100
High
9
90
8
80
7
70
Medium High
6
60
5
50
Medium
4
40
3
30
Med Low/      
Defrost
2
20
1
10
Low
Power level can be set by using the power level + 
or -. You can also press the corresponding numeric 
pad after pressing either power level + or -.
Setting Microwave Controls