Philips SPD8020CC/05 Manuale Utente

17

 

 

 

10.  The administrations console of your NAS 

opens, allowing you to configure your 

network hard disk 

 

How to configure your NAS  

 

 

System management – Information 

Here you can find general information on your 

NAS after you logged in, such as: 
 

System Information:   

System Name  

IP Address  

Subnet Mask 
Workgroup 

Firmware Version 

Date 

Uptime 

Total Storage 

Available Storage 
 

 

System management – Setup 

Here you can configure general settings 

 

Date and Time 
You can either enter the date and time manually 

or enable an internet time server. 

 

To enter the date and time manually: 

1.  Disable ‘set Clock from internet time server 

(NTP)’ 

 

2.  Fill in the correct date and time 

3.  Select accept to confirm your changes 

 

To use the internet time server : 
1.  Enable ‘set Clock from internet time server 

(NTP)’ 

2.  Fill in one of the below mentioned time server 

addresses in the NTP server field  

(corresponding with your region) 

3.  Select accept to confirm your changes