Philips Blender HR2181/00 HR2181/00 Manuale Utente

You can only place the blender jar on the motor unit when the handle 

points to the right.

 2 

 Put the plug in the wall socket.

 1 

 Put the ingredients in the blender jar.

 2 

 Place the lid on the blender jar (Fig. 6).

Push the lid down firmly to close it.

 3 

 Insert the measuring cup into the opening in the lid (Fig. 7).

 4 

 Turn the speed selector to select a speed.

Do not let the appliance run for more than 3 minutes at a time. If you 

have not finished processing after 3 minutes, switch off the appliance. 

Let the appliance cool down for one minute before you let the 

appliance run again.

 5 

 Before you open the lid, set the speed selector to 0 to switch off 

the appliance. 
after using the blender

 1 

 Unplug the appliance.

 2 

 Remove the lid with the measuring cup from the blender jar.

 3 

 Remove the blender jar from the motor unit.

 4 

 Always clean the removable parts immediately after use.

 - Cut solid ingredients into smaller pieces before you put them in the 

blender jar.

 - Do not process a large quantity of solid ingredients at the same time. 

In that case, process the ingredients in a series of small batches.
Measuring cup

You can use the measuring cup to measure ingredients.

8

Always clean the removable parts immediately after use.
Avoid touching the blades. The blades are very sharp.

 1 

 Unplug the appliance.

 2 

 Disassemble all removable parts before you clean them.  (Fig. 8)

 3 

 Clean all removable parts in the dishwasher or in warm water with 

some washing-up liquid.

All parts except the motor unit are dishwasher-proof.

 4 

 Clean the motor unit with a moist cloth.

Never immerse the motor unit in water or any other liquid, nor rinse 

it under the tap.
Do not use abrasive cleaning agents, scourers, alcohol etc. to clean the 

motor unit.

 1 

 Pour lukewarm water (500ml-700ml) and some washing-up liquid 

into the blender jar.

 2 

 Place the lid on the blender jar and insert the measuring cup into 

the hole in the lid.

 3 

 Plug in the appliance.

 4 

 Put the blender jar on the motor unit. 

 5 

 Press the pulse button to switch on the appliance and hold it for a 

few seconds.

 6 

 Release the pulse button and unplug the appliance.

 7 

 Remove the blender jar from the motor unit, take off the lid and 

rinse the blender jar with clean water.