DataVideo ITC-100 Manuale Utente
6
Rear Panel:
Channel Input / Output XLR Sockets
Each of the 8 channels has an XLR connector that carries
bidirectional signals between the ITC100 and ITC100SL. All
connections are contained within the one cable. Channels 1 ~ 4
are supplied tally light information from tally A; channels 5 ~ 8
are supplied tally light information from tally B.
bidirectional signals between the ITC100 and ITC100SL. All
connections are contained within the one cable. Channels 1 ~ 4
are supplied tally light information from tally A; channels 5 ~ 8
are supplied tally light information from tally B.
Tally Inputs A & B
Tally Inputs A & B are configured for direct connection to the
Datavideo RMC140, RMC90 or SE500. They supply bicolor
tally information to the ITC100SL; RED indicates Live and
AMBER indicates Cued. Tally A will feed information to
channels 1 ~ 4 and Tally B will feed information to channels 5 ~
8
Datavideo RMC140, RMC90 or SE500. They supply bicolor
tally information to the ITC100SL; RED indicates Live and
AMBER indicates Cued. Tally A will feed information to
channels 1 ~ 4 and Tally B will feed information to channels 5 ~
8
DC In 12V 1.5A
Connect the 12V 1.5A power supply. The power supply plug
has a screw in locking collar to secure the connection.
has a screw in locking collar to secure the connection.
Ground Terminal
When connecting this unit to any other component, make sure
that it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure
to use wire with a crosssectional area of at least 1.0 mm2.
that it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure
to use wire with a crosssectional area of at least 1.0 mm2.