Philips 24HFL3008W/12 Istruzione Sull'Installazione
3
2. Find out the state of the TV
It is important to know if a TV is in ‘virgin mode’ (out of the box) or installed before.
If you can see this screen below, you know that the TV is in ‘virgin mode’ and you can install the set. See chapter 4 of
this manual.
this manual.
If you power on the set and then press the ‘Home’ button on the guest remote, you will see this screen appear if the
TV already has been installed or the wizard was already skipped.
TV already has been installed or the wizard was already skipped.
Professional Settings ON
Professional Settings OFF
You can start the installation wizard again by reinstalling the TV as explained in chapter 3 of this manual.
Disable the Professional Settings
Access the setup menu press the ‘RC5 SETUP’ key, and then press the ‘Home/Menu’ button. (For the guest remote
control, press the following keys in sequence: 3,1,9,7,5,3, ‘MUTE’).
Go to “Professional Mode” and select the “OFF” option and confirm with “OK”. Go back with the arrow keys and
select “Store settings”. Confirm with “OK”. After restarting the TV the PROFESSIONAL SETTINGS mode will be set to
OFF.
Note: All settings can be done without disabling the Professional Mode, but all settings from the ‘Professional Settings’ which were not saved
will be discarded during the transition to Consumer Mode.
will be discarded during the transition to Consumer Mode.