Philips CAW7740N/05 Manuale Utente

Configuring the Wireless Router

16

Choose a function and click Next>>.

Backup allows you to save the Wireless Router’s configuration to a file.
Restore can be used to restore the saved backup configuration file.
Restore to Factory Defaults resets the Wireless Router to the original 
settings. You will be asked to confirm your decision.

Use the Firmware Upgrade screen to update the firmware or user 
interface to the latest versions. Download the upgrade file from 
www.philips.com/support (Model CAW7740N), and save it to your 
hard drive. Then click "Browse..." to look for the downloaded file. Click 
"BEGIN UPGRADE". Check the Status page Information section to 
confirm that the upgrade process was successful.

Click "REBOOT ROUTER" to reset the Wireless Router.
If you perform a reset from this page, the configuration will not be 
changed back to the factory default settings.

If you use the Reset button on the rear panel, the Wireless Router 
performs a power reset. Press the button for over five seconds, and the 
factory default settings will be restored.

The Status page displays WAN/LAN connection status, firmware, and 
hardware version numbers, illegal attempts to access your network, as 
well as information on DHCP clients connected to your network. The 
security log may be saved to a file by clicking "Save" and choosing a 
location.

Make sure the router is connected correctly. For a detailed description, 
refer to the user manual. This can be found on the Installation CD 
provided.