DELL 201S Manuale Utente
3-2
Dell PowerVault 200S, 201S, 210S, and 211S Storage Systems Installation and Service Guide
To install the rack storage system in a stand-alone unit, perform the following tasks
(as described in the following subsections):
(as described in the following subsections):
1.
Attach the hat flanges to the storage system.
2.
Attach the stabilizers to the stand-alone chassis.
3.
Install the storage system in the stand-alone chassis.
4.
Complete the installation.
1.
Remove all of the installed hard-disk drives from the storage system.
2.
Carefully place the storage system on its left side.
The enclosure indicator lights should be at the top.
3.
If the nut-plate mounting screws (shown in Figure 3-1) and the sliding lock bar are
present, remove the front two screws and discard them.
present, remove the front two screws and discard them.
If neither the screws nor the bar is present, go to step 4.
1
Nut-plate mounting screws