Infocus IN5142 Manuale Utente
6
Installation
NOTE
• Set the tilt angle of Set
A within 9 degrees of the level line.
(continued on next page)
Deciding the installation position
Decide the position of Set
A and its projection angle. (
User’s Manual (concise)
→
Arrangement
and
Adjusting the projector’s elevator
)
2.2 Installing the first projector (Set A)
Setting up Set A
2.
Adjust the INSTALLATION settings first because it may change the
image position. (
Operating Guide
→
SETUP menu
)
3.
Adjust the image of Set
A to fit the screen with the ZOOM, FOCUS and LENS
SHIFT features. (
Operating Guide
→
Adjusting the lens
)
Adjust the image position using KEYSTONE and PERFECT FIT as needed.
(
Operating Guide
→
EASY MENU
or
SETUP menu
)
NOTE
• KEYSTONE cannot be selected when PERFECT FIT is in use.
To adjust the image using both KEYSTONE and PERFECT FIT, adjust
KEYSTONE first.
• If you are using Simple Stack, go to
• If you are using Simple Stack, go to
2.3 Installation of the second projector
(Set B)
. (
8)
1.
Turn on Set
A.
WARNING ► For IN5142, IN5144, IN5144a and IN5145 only: You can install
the projector in any direction with specified mounting accessories. Consult with
your dealer for that type of installation.