ADC T1MF2S04RA Manuale Utente

2-2

The shipping package for the HMS-318 List 3 is designed to reduce the possibility of product damage associated 
with routine material handling experienced during shipment. To reduce the potential damage to the product, 
transport the shelf in its ADC-specified packaging. Failure to do so may result in damage to the shelf. Also do not 
remove the shelf from its shipping container until you are ready to install it. Refer to 

 for unpacking instructions.

 lists the items included in the HMS-318 List 3 shipment. After inspecting each item, check and initial that it 

has been received. A “Notes” section has been provided on the next page to record damaged or missing parts.

 Do not discard the packaging materials used in shipping your HMS-318 List 3 shelf. You will need the 

packaging materials in the future if you move or ship your HMS-318 List 3 shelf.

9

"

ˆ

HiGain Management Shelf (HMS-318 
List 3)

1

HMS-318 List 3

ˆ

Adjustable Mounting Brackets, two 
(either 2-inch recess or 5-inch recess) 
installed at factory

1 set

N/A

ˆ

HMS-318 List 3 Shelf Installation Kit 
includes mounting hardware (four #12-
24 x 0.5 inch panhead screws), label 
holder, label, 50-ohm BNC terminator, 
and BNC-T female connector

1 bag

130-1028-01

ˆ

ETSI Mounting parts kit includes 
mounting hardware (eight #6-32 x .250 
inch Phillips head screws w/lock 
washer, four M6-1.0 x 14 mm panhead 
screws), and two ETSI Mounting 
Brackets, one 

1 bag

N/A

ˆ

Shelf Grounding kit includes one 
cabletie, one #12-24 x 0.5 inch Hexhead 
screw w/washer, one #12 Ring 
Terminal, 12-10 AWG (used to connect 
the grounding cables to the grounding 
stud), and one ground jumper

1 bag

N/A

ˆ

HiGain Management Shelf (HMS-318 
List 3) User Manual

1

LTPS-UM-1261

ˆ

(Optional) Extender Bracket for 
mounting into 23-inch (58.4 cm) rack 
includes two brackets and all the 
appropriate mounting hardware.

1

EB-52